ASTM A387 F5/ASTM Grade 5Plate & Sheet, Cold Roll Strip, Cold Roll sheet, Cold Rolled coil
-
SAE A 249 TP304L Details
SAE standard material A 249 TP304L belongs to the USA, from the steel to the finished product, we have the perfect technology and many years of accumulation of experience, we can now produce products include steel coil, sheet, plate,round bar, square steel, steel wire, steel pipe, forgings, other...
A 249 TP304L Application:Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.030 | ||
| Si | - | 1.00 | ||
| Mn | - | 2.00 | ||
| P | - | 0.045 | ||
| S | - | 0.03 | ||
| Cr | 18.00 | 20.00 | ||
| Ni | 8.00 | 12.0 |
| Yield Rp0.2 (MPa) |
Tensile Rm (MPa) |
Impact KV (J) |
Elongation A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | HBW |
|---|---|---|---|---|---|---|
| 253 (≥) | 569 (≥) | 44 | 22 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 421 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
|---|---|---|---|---|---|
| 258 (≥) | 111 (≥) | 21 | 22 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
- | - | - |
| 318 | 149 | 538 | - | - | - |
| Product type | Products | Dimension | Processes | Deliver Status |
|---|---|---|---|---|
| Plates / Sheets | Plates / Sheets | 0.08-200mm(T)*W*L | Forging, hot rolling and cold rolling | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Steel Bar | Round Bar, Flat Bar, Square Bar | Φ8-1200mm*L | Forging, hot rolling and cold rolling, Cast | Black, Rough Turning, Shot Blasting, |
| Coil / Strip | Steel Coil /Steel Strip | 0.03-16.0x1200mm | Cold-Rolled & Hot-Rolled | Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting |
| Pipes / Tubes | Seamless Pipes/Tubes, Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion, Cold Drawn, Welded | Annealed, Solution and Aging, Q+T, ACID-WASHED |
-
Equivalent Grade
304 L | 304L | 304L | A 167 Type 304L | A 182 F 304L | A 213 TP304L | A 240 Type 304L | A 249 TP304L | A 269 TP304L | A 270 TP304L | A 276 304L | A 314 304L | A 336 Grade F304L | A 358 304L | A 403 WP 304L | A 409 TP304L | A 473 304L | A 478 Type 304L | A 479 304L | A 493 Type 304L | -
Standard No.
- USA - SAE - A 249/A 249M (2010)
Welded Austenitic Steel Boi...
- USA - SAE - A 249/A 249M (2010)
-
Relevant products
-
Machinability
- Machinability
-
Heat Treatment
- Heat Treatment
